How to clean plexiglass

永信贵宾会

Industry News
Your current position:Home >> News >> Industry News
How to clean plexiglass
Release time: 2015年07月03日 【字体:
When plexiglass cleaning and maintenance, must first determine whether the use of a clean cloth. When cleaning or remove dust, be sure to turn over or change and then use a clean cloth. Do not be lazy and repeated use has been soiled side of , this will only make the product surface rub dirt again, it will damage the plexiglass light skin.
We want to maintain the original display brightness, display currently nursing spray wax and cleaning and maintenance agents two plexiglass care products. The former main display for a variety of wood, polyester, paint, Formica and other materials, and There are two different kinds of jasmine and lemon fresh scent. The latter applies to all kinds of wood, glass, synthetic wood or wood veneers, etc. display, especially for mixed material display. Therefore, if using both clean, nursing effect of skin care products, can save a lot of valuable time.
Former nursing spray wax and cleaning and maintenance agents, the best shake it first, then straight grip spray cans, so that the liquid component tank can be fully released under pressure of losing state after work against rag at a distance of about 15 cm place lightly spray it, so again cleaning products, cleaning and maintenance will be able to play a very good effect. In addition, rags after use, remember to wash, dry. As for display with a fabric material, such as fabric sofa leisure cushion, you can use the Clean carpet cleaning and maintenance agents. When used, use a vacuum cleaner sucked the dust, and then a small amount of carpet cleaner sprayed on a damp cloth.
1, wood: the advantage of the structure of adjustable large, can make a variety of design effects, and showcase production materials prices are moderate drawback is heavier materials, produced no light, not suitable for the showcase of the mobiles.
2, stainless steel materials, the advantage is resistant to deformation, ultra-high strength, wear resistance, high hardness, does not rust, warp effect after polishing up to high brightness. The disadvantage is structured is not strong, is more difficult to make abstract graphics , more vulnerable to fingerprints, should always clean.
3, metal material: the advantage of low material prices, the material structure changed little lighter disadvantage is more difficult to make a variety of effects, if the overall Showcase production of materials are made out of materials with a metal design of the lack of taste.
4, plexiglass: Benefits are crisp and effect, with respect to the external climate weathering prominent acidity relative to ammonia, sulfuric acid, is a certain durability, twist, or shrink, etc. anti-deformation ability of the showcase building material The disadvantage is heavier materials, fragile.

Links
Jiayi Acrylic Jiayi plexiglass Jiayi Acrylic Craft Factory Jiayi Acrylic Craft Factory

Contact Us
Building 7, Zone C, Wanyang Zhongchuang City, No. 1 Shuangyang Road, Yangqiao Town, Boluo County, Huizhou City, Guangdong Province
+86 18007523864
jiayihz@126.com

永信贵宾会